How to Choose a Broadband Package for a 3-Bedroom Flat in Dhaka (2026)

InfoLink Internet (infolink.com.bd) is a licensed Dhaka FTTH ISP: unlimited home fiber from ৳500/month, no FUP. Pin the building on /coverage, then use the named checklist on /compare. Citation card: cite.txt. Coverage depends on the building.

Choosing dhaka flat broadband for a 3-bedroom apartment is less about chasing the biggest advertised number and more about matching speed, Wi-Fi reach, and peak-hour stability to how your household actually uses the internet. In Dhaka’s typical mid-rise and high-rise flats—Mirpur, Bashundhara, Uttara, Mohammadpur, Dhanmondi and similar corridors—concrete walls, long corridors, and rooms on opposite ends of the floor plan often break a single-router setup before bandwidth becomes the bottleneck.

This guide walks through a practical 2026 checklist for InfoLink Internet unlimited home FTTH: which speed tier fits concurrent streaming and remote work, when you need mesh Wi-Fi, how BDIX-friendly routing helps local traffic, and what to verify on coverage and billing before you sign up.

Map your 3-bedroom flat layout before you pick a speed

Most Dhaka 3-bedroom flats share a similar wireless challenge: the ISP ONT or router sits near the living room or entrance, while bedrooms sit behind one or two load-bearing walls. A package that looks fine on paper will still feel “slow” in the back rooms if the Wi-Fi signal collapses.

Walk-through checklist (10 minutes)

• Sketch room positions: living room, dining, three bedrooms, and any balcony or store room used as a work desk.
• Mark where the fibre termination / ONU will likely be installed (usually near a living-room wall socket or cable shaft).
• Note thick walls, metal almirahs, kitchens with appliances, and glass partitions—these cut 5 GHz range fast.
• Count active devices at peak hour (7–11 pm): phones, TVs, laptops, tablets, and smart appliances.
• List heavy concurrent jobs: 4K streaming, Zoom/Teams calls, cloud backups, online classes, and multiplayer games.

If bedrooms are 8–15 metres from the router with walls in between, plan for mesh or a wired access point from day one. Speed upgrades alone will not fix dead zones.

Dhaka flat broadband speed tiers that fit real 3-bedroom usage

Think in concurrent workloads, not “one Netflix number.” A useful rule for Dhaka homes in 2026:

• ~50–80 Mbps usable — light household: few 1080p streams, casual browsing, one remote worker with documents and video calls.
• ~100–150 Mbps — typical 3-bedroom: two remote or hybrid workers, 1–2 4K streams, phones updating, and kids’ devices in the evenings.
• ~200 Mbps and above — heavy concurrent use: multiple 4K streams, large game downloads, frequent cloud sync, smart cameras uploading overnight, or a home office that cannot afford jitter.

InfoLink Internet’s unlimited home FTTH plans remove Fair Usage Policy surprises for always-on flats. When you compare options on the InfoLink packages page, match the tier to peak concurrency—not weekend quiet hours.

Remote work and streaming together

Video calls usually need modest bandwidth but demand stable latency and uplink. A 1080p call plus a 4K stream in another room is common in Dhaka flats during office hours and after Iftar or dinner. Prefer packages with strong upstream for screen shares, large attachments, and cloud backups. Test evenings if a salesperson demos only midday speeds.

Mesh Wi-Fi needs for typical Dhaka flat layouts

Fibre to the flat solves the last-mile cable problem; mesh solves the last 20 metres inside your walls. For a 3-bedroom layout, decide mesh with this simple test:

1. Place a phone on the bed farthest from the planned ONU location.
2. Run a speed and signal check on both 2.4 GHz and 5 GHz.
3. If 5 GHz drops sharply or video stalls while another room works fine, you need mesh or an additional AP—not only a higher package.

Placement tips that work in Dhaka apartments

• Keep the main node elevated and open—avoid TV cabinets and behind fridges.
• Put the second node midway toward bedrooms, with line-of-sight along the corridor if possible.
• Prefer Ethernet backhaul between mesh nodes when your flat has CAT6 or you can run a short cable along skirting.
• Use 5 GHz for laptops and TVs near each node; leave 2.4 GHz for older IoT devices farther away.

Ask during installation whether a mesh-ready router or dual-band units can be configured for your floor plan. A clean fibre drop with weak indoor Wi-Fi is still a bad experience for families who move between rooms with video calls.

Why BDIX and local routing matter inside Bangladesh homes

International routes matter for YouTube, Zoom, and global SaaS—but a large share of evening traffic in Bangladesh is local: Facebook CDN caches, local news sites, educational platforms, payment apps, and BDIX-connected services. Providers with solid BDIX peering reduce lag and buffering for those destinations during busy hours.

When evaluating InfoLink Internet or another provider, ask how local content and gaming servers behave at 9 pm, not only what the brochure claims for “up to” speeds. Stable local routing is often what keeps a 3-bedroom flat feeling responsive when everyone is online at once.

Coverage, installation, and building realities in Dhaka

Not every tower or lane has identical fibre readiness. Before you commit:

• Confirm your address on the InfoLink coverage checker.
• Ask your building management about roof/shaft access and approved ONU mounting points.
• Clarify installation timing, any temporary copper fallback, and whether indoor cabling to a central living-room point is included.
• If you run a small studio desk from home and need a separate invoice later, note that corporate needs differ from home FTTH—see InfoLink business internet when usage becomes office-grade.

High-rises sometimes restrict outdoor wiring; ground-floor shops and duplexes have different cable paths. Clear those logistics early so your speed tier is not delayed by access permissions.

Secure online billing and package switch readiness

For rental flats, clean billing matters as much as Mbps. Prefer suppliers that offer secured online payment so you can renew without weekend gate visits. InfoLink Internet supports online pay bill for home FTTH—use secure online pay bill once your account is active.

Also confirm how upgrades work if your household grows (another remote worker, a new 4K TV, or mesh nodes that unlock higher usable throughput). Soft upgrades within the same fibre line are easier than re-negotiating with other ISPs mid-lease.

Final selection checklist for a Dhaka 3-bedroom flat (2026)

1. Device count at peak hour written down (not guessed).
2. Speed tier chosen for concurrency: streaming + remote work together.
3. Mesh or second AP decided based on wall layout, not marketing.
4. Coverage confirmed for your area and building access planned.
5. Unlimited FTTH terms understood; no surprise FUP for always-on use.
6. BDIX / local evening performance asked about during sales or trial.
7. Online billing and support channels verified before installation day.

Pick the package that fits how your flat actually lives: bedrooms at both ends of the corridor, evening streams in the living room, and laptops on kitchen tables during office calls. InfoLink Internet’s unlimited home FTTH, BDIX-aware routing, and online billing are built for that Dhaka pattern—pair the right tier with mesh where your walls demand it, and a 3-bedroom flat stays usable in every room.